Gasket maker 50g manufacturers

Product Details

Feature

The Gasket maker 50g product is one kind of sulfur silicone sealant with one acid component which could be applied at any climate and could take chemical reaction with the water in the air rapidly. Good aging-resistant ability, high flexible, perfect performance of high or low temperature resistant. Have transparent, grey, white and black colors for selection.


Application

This product are widely used for bonding of glass, rubber, wood, pottery, metal and surface of fiber, this product not suitable to use under water, and not suitable for bonding of dope, please finish brushing before construction.

image

Product description

Using Method: 
1.Clean the surface to get rid of the rust, oil, or any dirty.
2.Cut the cap point, twists the cap mouth, cut at 45 degree angle bevelling according to need.
3.In order to get the smooth glue, hold the bottle at 45 degree angle, squeeze the glue through cap mouth. 
4.If further sealing needed, please finished operation within 5 minutes, wipe off the surplus glue with dry tissue.
5.After completely solidify, amend the glue by knife.

 

Warning: 
1.It is not preferred for the applying at the air-tight situation. Keep ventilative during the operation as the acetic acid is released due to the chemical reaction.
2.Re clean the surface if operating could not be finished within 1 hour since first cleaning. Re clean the surface as well if rains or dirty is onto the surface again.
3.No toxic of product. But be careful not to make the glue get into the eyes or nose. Wash them at once if does.
4.Keep smooth and continuous during applying of the glue onto the sealing surface. The adhesive performance would be not good if the air get in.
5.Tighten the lid at once and take off the extrusion nozzle after gluing to avoid entering of the wet air and causing of the solidifying. Eliminate the remnants around the nozzle.
6.Remove the solidified glue on the bottleneck during re applying. The unsolidified glue inside could be used still. Store the rest glue of the bottle at air tight and shade.


Attention: 

1.This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2.Do not put within kids reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3.When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect.
4.After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.

5.This product should be operated at temperature 5-40oC,relative humidity 40-80%

 

Storage And Packing: 
1.The product is nonflammable. Keep dry and shade, air tight during storage.

2.The shelf life for grade acetic silicone sealant is 12 months and 9months for the medium grade.

3.Packing specification:,in gasket maker


FAQ

  • Q1: Can I customized my order?

    P: Yes, OEM/ODM service is available. Customized logo/package/color/design.

  • Q2: Can I ask for samples before placing an order?

    P: Yes, we can provide free samples to check quality.

  • Q3. Is there any spare parts service if the order is large?

    P:Of course, we will evaluate the quantity of spare parts according to your order quantity .

  • Q4: What's the standard MOQ for one design ?

    P: If with your logo and design,normally it is 7500pcs.Or we print based on the MOQ and you run out in following orders .There is no MOQ limitation if with our own logo and normal packing .

  • Q5:What is the payment terms ?

    P: T/T or L/C, west union,

  • Q6: What is the delivery time ?

    P:For the first order it needs about 30 days after receiving deposit and confirm designs .For second order ,will be much fast .

  • Q7: MOQ for one order ?

    P: 1*20GP container about 2500ctns .

  • Q8:Packing quantity

    P: For example ,400ml can . 1*20GP 2500CTNS /30000PCS 1*40GP 4800CTNS /57600PCS 1*40HQ 5950CTNS /71400PCS

  • Q9 : Why choose us ?

    P: 1,Strict quality control and after sales warranty 2, Team Cooperation no matter before -sales or after sales . 3 Consider more for our customers ,but not ourselves because we are partner 4 Easy to work with us ,we remember each word you say and do what we agree with you . 5 Good services with details 6 Professional

  • Q10 : I can not find the item needed in your page

    P: You can contact us ,we will send you catalogue because websites do not show all of our products .

  • Q11: Can we visit your factory ?

    P: Welcome at any time

  • Q12 : What are the trade terms ?

    P: FOB ,CFR and CIF ,EXW

  • Q13: How does your company control the quality?

    P: Our QC team will do strict quality control inspection for materials and during mass production and after finishing mass production to assure best quality.

  • Q14: Can your products meet the national quality standards?

    P:Sure, we can provide the corresponding compliance test report.

  • Q15: What is the warranty for the products?

    P: Most of our products have 3 years warranty.

  • Q16: Which certificates do you have ?

    P : ISO14001 ,ISO9001 ,SGS ,ROHS etc.

  • Q17: Can we use our own forwarder ?

    P: You can use your own forwarder or our forwarder .Our forwarders are professional forwarders only for dangerous goods for 20 years .

  • Q18:Aerosol products are dangerous goods ,how can we ship them?

    P: We have professional forwarders, you just need to place order and wait the goods ,we will arrange all the things.

  • Q19: Do you have all the documents or certificates for shipping ?

    P: Yes ,sure

  • Q20: What can you help us ?

    P: Provide the information for your market /Give you suggestions for the orders ,sales or market strategy /Help you to make the designs / Help you for the booking /Help you solve all the problems before or after sales

  • Q21 : How long will you reply me ?

    P: 24 hours at any time

  • Q22 :How long have your sales been working in this field?

    P: More than 10 years

Inquire Now

(0)

sales@sprayaerosol.com

(+86) 13823106464

Message
leave a message

If you have any needs, please submit the form below and we will contact you as soon as possible.

Hello,
Premium Industry Co.,Ltd ,has been specializing in designing ,manufacturing and marketing of aerosol paints , lubricants, car care products ,household care products for many years .Aerosol paint and car care products are our competitive advantage products .