Waterproof expanding PU foam Manufacturers & Suppliers

Product Details



Professional polyurethane fling and construction foam with a fine cellular structure.High thermal and acoustic insulation.Contains good fire resistant and very good adhesion properties and is cuttable after curing. 

Product videos

  • PU foam

Product description

Before use connect the adaptor to the canister and shake canister vigorously for at least 20 times. Fill the joint for about 50%,the foam will expand further during curing an will fill the joint. For optimum adhesion and fast curing, lightly moisten the surfaces with water. In case of large joints form layers of up to 4 cm. Before a second layer is applied the first layer should be cured. Cuttable after about 1 hour.

Professional polyurethane fling and construction foam with a fine cellular structure.High thermal and acoustic insulation.Contains good fire resistant and very good adhesion properties and is cuttable after curing. 


Open the cover

Tighten the tube on the valve

Shake up and down for 30 seconds

Turn the bottle upside down, push the valve cover slightly, and test the glue



 Spray water on the surface before construction to increase foam expansion

Slowly build in the gap from top to bottom layer by layer,

Fill the gap 50-70%

Cut off excess foam with a blade after curing

The surface of the foam can be covered with silicone, cement, and paint to prevent damage from ultraviolet radiation (after 24 hours after construction)

Fire resistant sealing and filling of joints and seams or in certain areas where fire resistance is required. Fire resistant tested according to EN 1366-4 until 60 minutes in a gap of 20mm wide. Combine with Silicone Sealant until 180 minutes in a gap of 40m wide. Ensure that you choose the correct fire resistance for your application by consulting the classification and test reports.




  • Q1: Can I customized my order?

    P: Yes, OEM/ODM service is available. Customized logo/package/color/design.

  • Q2: Can I ask for samples before placing an order?

    P: Yes, we can provide free samples to check quality.

  • Q3. Is there any spare parts service if the order is large?

    P:Of course, we will evaluate the quantity of spare parts according to your order quantity .

  • Q4: What's the standard MOQ for one design ?

    P: If with your logo and design,normally it is 7500pcs.Or we print based on the MOQ and you run out in following orders .There is no MOQ limitation if with our own logo and normal packing .

  • Q5:What is the payment terms ?

    P: T/T or L/C, west union,

  • Q6: What is the delivery time ?

    P:For the first order it needs about 30 days after receiving deposit and confirm designs .For second order ,will be much fast .

  • Q7: MOQ for one order ?

    P: 1*20GP container about 2500ctns .

  • Q8:Packing quantity

    P: For example ,400ml can . 1*20GP 2500CTNS /30000PCS 1*40GP 4800CTNS /57600PCS 1*40HQ 5950CTNS /71400PCS

  • Q9 : Why choose us ?

    P: 1,Strict quality control and after sales warranty 2, Team Cooperation no matter before -sales or after sales . 3 Consider more for our customers ,but not ourselves because we are partner 4 Easy to work with us ,we remember each word you say and do what we agree with you . 5 Good services with details 6 Professional

  • Q10 : I can not find the item needed in your page

    P: You can contact us ,we will send you catalogue because websites do not show all of our products .

  • Q11: Can we visit your factory ?

    P: Welcome at any time

  • Q12 : What are the trade terms ?

    P: FOB ,CFR and CIF ,EXW

  • Q13: How does your company control the quality?

    P: Our QC team will do strict quality control inspection for materials and during mass production and after finishing mass production to assure best quality.

  • Q14: Can your products meet the national quality standards?

    P:Sure, we can provide the corresponding compliance test report.

  • Q15: What is the warranty for the products?

    P: Most of our products have 3 years warranty.

  • Q16: Which certificates do you have ?

    P : ISO14001 ,ISO9001 ,SGS ,ROHS etc.

  • Q17: Can we use our own forwarder ?

    P: You can use your own forwarder or our forwarder .Our forwarders are professional forwarders only for dangerous goods for 20 years .

  • Q18:Aerosol products are dangerous goods ,how can we ship them?

    P: We have professional forwarders, you just need to place order and wait the goods ,we will arrange all the things.

  • Q19: Do you have all the documents or certificates for shipping ?

    P: Yes ,sure

  • Q20: What can you help us ?

    P: Provide the information for your market /Give you suggestions for the orders ,sales or market strategy /Help you to make the designs / Help you for the booking /Help you solve all the problems before or after sales

  • Q21 : How long will you reply me ?

    P: 24 hours at any time

  • Q22 :How long have your sales been working in this field?

    P: More than 10 years

Inquire Now



(+86) 13823106464

leave a message

If you have any needs, please submit the form below and we will contact you as soon as possible.

Premium Industry Co.,Ltd ,has been specializing in designing ,manufacturing and marketing of aerosol paints , lubricants, car care products ,household care products for many years .Aerosol paint and car care products are our competitive advantage products .